Product Description
The Virta Combi HL110SA pairs a traditional sauna heater with a built-in steamer in one black steel column. Dry heat, steam, or both together, set from a single control.
The heater is rated 10.5 kW, with a 2.1 kW steamer and a 1.3-gallon reservoir that fills automatically from a cold water line. It holds 154 lb of stones and, per Harvia, suits sauna rooms of 177 to 635 cubic feet. Choose 240V single-phase or 208V three-phase to match your service.
The heater needs a Harvia Combi control and sauna stones to operate. Both are offered here as options: the Xenio CX30C or the Fenix FX30C control, and a matched 4-box set of stones in three types. Plan for a hardwired circuit, a cold water connection, and a licensed electrician.
Ideal for: a larger home sauna where dry heat and steam share one heater.
The Therapeutic Patio - intentional outdoor living.
We confirm your exact shipping timeline within 1-2 business days of your order - or email us before you buy for the current lead time on this product. Your order ships with free standard shipping to the lower 48. The Virta Combi HL110SA carries a 2-year limited warranty from Harvia for family use, extended to 3 years when the heater is installed by a qualified electrician and registered with Harvia within 30 days of purchase. Questions before you order? Email support@thetherapeuticpatio.com or call (225) 535-3580.
Features
-
10.5 kW heater with a 2.1 kW steamer in one unit
- 240V single-phase or 208V three-phase
-
Automatic-fill reservoir of 1.3 gallons (5 L), fed from a cold water line
-
Steam output up to 2.5 kg per hour
-
Sized for rooms of 177 to 635 cubic feet
-
154-lb stone capacity using 5 to 10 cm stones
-
Black steel body 16" wide x 19" deep
- Temperature sensor included
-
Choice of Harvia Combi control Xenio CX30C or Fenix FX30C, offered as options
-
Matched 4-box stone set in split-face, vulcanite, or Elite Pro stones
- ETL listed
-
Hardwired installation by a licensed electrician
Specifications
Construction: Steel, black finish. 16" W x 19" D x 33" H. Weight 70.5 lb.
Electrical: 10.5 kW heater with a 2.1 kW steamer, 60 Hz. 240V single-phase: 29.2 A across two groups. 208V three-phase: 29.2 A. Supply wire: 10 AWG copper rated 90 C minimum, from the power unit to the heater. Harvia does not publish a breaker size; your electrician sizes the breaker and confirms the wiring to local code. Hardwired; installation by a licensed electrician.
Water: Connects to a cold water line at 150 to 400 kPa with a shut-off valve and vacuum breaker. The manual advises a floor drain in the sauna or adjoining wash area. Follow local plumbing regulations.
Room: Sauna rooms of 177 to 635 cu ft. Minimum ceiling height 75". Minimum clearances of 2" horizontal and 42" vertical; see the installation manual for the diagram.
Controls: Requires a Harvia Combi control matched to the voltage, offered here as the Xenio CX30C or the Fenix FX30C.
Stones: Capacity 154 lb, 5 to 10 cm stones. Stones are required for operation and are offered here as a matched 4-box set in three types: split-face (AC3000), vulcanite (AC3040), or Elite Pro (AC3050). Choose None only if you already have them.
What's Included: Heater with built-in water reservoir, temperature sensor, fastening kit, installation and operation manual.
Certification: ETL listed.
Product Manuals
